Handrail OP29

Self closing gates are ideal for fall prevention and personnel protection in areas such as access ladders and stairways, walkways, warehouses, zone segregation and machinery guards.
Constructed from high quality galvanised tube and Interclamp fittings for durability and corrosion resistance for an extended product life, the gates are also available with the tube powder coated in safety yellow for a highly contrasting finish.
It is possible to produce different lengths, maximum length 1200mm.
Suitable for attaching to a Ø48 tube.

The OP1 handrail has smooth transitions and is designed for installation stairs and sidewalks.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP2 is a single inline handrail / midrail for stairs and level applications under one metre (FFL) & midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP13 is a single inline handrailf for stairs and level applications under one metre.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

Aluminium ornamental protective railing bollard.

- coated anthrachite grey (metallic grey)
- approx. 900mm above ground
- cast aluminium with steel rod core
-bollard selection: - end post for top bar
- middle post for top bar
- corner post for top bar 90°
- end post for top and knee bar
- middle post for top and knee bar
- corner post for top and knee bar 90°

Protective railings made of 70 × 70 mm square post with height H1000 mm
cross bar 60x40 mm with lengths: 800, 1300, 1800 mm
hot-dip galvanized and coated yellow with black-striped
ground-mounted base plate
base plate dimensions: 100 x 150 mm
for protecting work sites, machines and facilitites or gateways