Handrail OP32
SKU: OP32.
Unit: m
Delivery time: 1 nädal
Unit: m
Delivery time: 1 nädal
OP32 is a single offset handrail / wall mounted for level, ramp and stair applications with suitable substrate for mounting.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Similar products
The OP1 handrail has smooth transitions and is designed for installation stairs and sidewalks.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP1.
OP3 is a single inline handrail / midrail & kerbrail for disabled ramps under one metre (FFL) and midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP3.
, Delivery time: 1 nädal
OP21 is top rail / mid rail bikeway barrier with offset top rail and midrail for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP21.
, Delivery time: 1 nädal
Horizontally opening swing gate, no separate support post needed
Locking mechanism: padlock, triangular key, or cylinder lock
Finishing: hot-dip galvanized or hot-dip galvanized with red and white reflective stickers
Installation: for casting in concrete or fixed to the ground with a base plate
Width options: 1500, 2000, 2500, 3000, 3500mm
Gate height: 950 mm
Locking mechanism: padlock, triangular key, or cylinder lock
Finishing: hot-dip galvanized or hot-dip galvanized with red and white reflective stickers
Installation: for casting in concrete or fixed to the ground with a base plate
Width options: 1500, 2000, 2500, 3000, 3500mm
Gate height: 950 mm
SKU: 413
, Delivery time: 2-3 nädalat
The OP2 safety barrier consists of two rails. The set is modular and includes tubes and clamps. Smart clamps and a Ø 48 mm steel tube are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm tubes. The set is delivered in parts.
SKU: OP2.1000
, Qty: Out of Stock
145,00 €
Manual barrier with pneumatic spring and fixed pole support
Main support: Steel construction 120 x 80 mm square tube with base plate 360 x 360 x 8 mm
for plugging down, including 4 holes Ø 20 mm
for anchor, hot-dip galvanized and powdercoated red,
barrier arm can be fixed in open and closed position
Supporting post: Steel tube 70 x 70 mm
with base plate 220 x 220 x 8 mm, including 4 holes Ø 20 mm for anchor
Barrier arm: Thick-walled Ø 80 mm aluminium tube
powder-coated with red reflecting stripes
Locking mechanism at the post support
Total width: Clear width + approx. 180 mm
Height: approx. 950 mm above ground
Width options: 3000, 4000, 5000, 6000, 7000 mm
Locking mechanism:
padlock
triangular lock
Euro profile cylinder lock
Main support: Steel construction 120 x 80 mm square tube with base plate 360 x 360 x 8 mm
for plugging down, including 4 holes Ø 20 mm
for anchor, hot-dip galvanized and powdercoated red,
barrier arm can be fixed in open and closed position
Supporting post: Steel tube 70 x 70 mm
with base plate 220 x 220 x 8 mm, including 4 holes Ø 20 mm for anchor
Barrier arm: Thick-walled Ø 80 mm aluminium tube
powder-coated with red reflecting stripes
Locking mechanism at the post support
Total width: Clear width + approx. 180 mm
Height: approx. 950 mm above ground
Width options: 3000, 4000, 5000, 6000, 7000 mm
Locking mechanism:
padlock
triangular lock
Euro profile cylinder lock
SKU: 415
