LED strobo light 4xLED slim 12/24V

Dimensions: 129x16x27mm
Type: ES6
Power: max 13.7 W
12-24V
6xLED yellow
23 different flashing modes with memory function, synchronizable
ECE R65 (XA1), ECE R10-05 (EMC), SAE Class 1, CA Title 13

133x45x10mm
12-24V
super slim: 10mm
12xPowerLED, amber
new generation Xtreme optics: wide-angle visual and classic aesthetics, clear lens
16 flash patterns w. nonvolatile memory
multi-units synchronization in a simultaneous or alternating flash
weatherproof and vibration resistant
aluminum base for efficient heat dissipation, reverse polarity protection, black flange
IPX8, ECE R10, ECE R65 (XA1, XB1), ECE R65 (XA2, XB2) SAE J595 Class1, CA13 Class B (R/A/B)
surface mount, screw dimension 120mm

20 x 0,25W LED
3 flash patterns
12V
bolt mount
set of 2

LW0043 has features such as:
1 warning flash, two level of intensity, day and night
4xLEDs 10 W
according to standards such as ECE R10, ECE R65.
voltage is 12 V/24 V

. LED Power: 4pcs*3W Cree, amber
. Voltage: 12-24Volt DC
. Waterproof: IP67
. Certificate: ECE R65 Single Flash, ECE R10
. SAE J595 CLASS1 Double Flash
. Material: PC lens, aluminum base with 3M sticker
. Flashing: 19 patterns, single, double, alternate flash...
. Function: With memory, Flashing at the same time, Flashing alone
. Five wires: Red-Positive, Black-Negative, Yellow-Switch, White-Input, Gray-Output
. dimensions: 99x30x10mm

The OPTIBEAM FLEX LM6 warning light offers completely new possibilities in terms of installation location. The light, which can be installed on surfaces curved up to 120 degrees, can be installed, for example, on the support leg of a crane, on the corners of a vehicle, or on other surfaces where a light with a straight and rigid body could not be used before. The design is aerodynamic and takes into account today's demands in terms of functions and attachments, including interference protection CISPR CLASS 3 (no radio interference) and ECE R65 class 2 (allowed in traffic both day and night), as well as IP67 protection class against water and dust. In addition, the FLEX LM6 has dual memory with separate wiring to quickly switch between steady light and warning light modes.

- Dimensions: 126.8 x 30.2 x 10.7 mm
- Bends up to 120° to fit a curved mounting surface.
- made of Dow Silastic silicone
- aerodynamic: minimal wind resistance
- screw fastening with glue, screw covers
- white glass.
- 6 High-Power LEDs
- 20 flashing modes, double memory, synchronisable: up to 20 lights
- short circuit protection, weatherproof, vibration resistant.
- working temperature: -40° ... +65°C
- Certificates: ECE R65 Class 2, ECE 10, SAE J595 Cl.1, SAE J845 Cl.1, CISPR25 Cl.3, CA13
- Cable length: 300 mm
- Voltage: 12/24V