PLATFORM ROUND 1430mm
SKU: HO.R1430.Ct
Unit: pc
Unit: pc
These playful seat cushions are a perfect addition to any court. The products can be combined and are available in three different sizes.
Possibility to create complete green areas and rest areas by combining them with other products of the series.
Dimensions: 1428*1428*450mm
Weight: 142kg
The rooms have:
• Fixing holes for fixing to the ground
• Warranty 5 years
Material:
Frame material
• Corten steel 3 mm
or
• Aluminum 4 mm + 2-layer powder coating
Seat material:
• Material: Garapa wood
• Flag sizes: 60x40 mm
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
Possibility to create complete green areas and rest areas by combining them with other products of the series.
Dimensions: 1428*1428*450mm
Weight: 142kg
The rooms have:
• Fixing holes for fixing to the ground
• Warranty 5 years
Material:
Frame material
• Corten steel 3 mm
or
• Aluminum 4 mm + 2-layer powder coating
Seat material:
• Material: Garapa wood
• Flag sizes: 60x40 mm
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
Points of attention • All products must be unpacked immediately after delivery. • Every kind of (hard) wood will turn grey under the influence of UV radiation, weather and wind. The final colour depends on the starting colour. • Wood is a natural product that “works” and will shrink or expand depending on temperature and moisture content. • Hardwood can turn black when in contact with Corten steel, which will eventually turn gray. • Corten Steel should never be constantly in moisture, it should drain well and ventilate in all situations. • Corten Steel products are not (fully) rusted on delivery, we only use Corten steel type S355JOWP. • Coastal areas: We do not recommend using Corten steel within a radius of 2 km from a coastline. • During the weathering process rust residue can come off the product, which can result in stains. • Drilling / grinding in the material is not permitted.
Similar products
DIMENSIONS
height: 82 cm
width: 63 cm
length: 182 cm
weight: abt 44 kg
MATERIALS
seat, backrest: oiled exotic wood
bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
height: 82 cm
width: 63 cm
length: 182 cm
weight: abt 44 kg
MATERIALS
seat, backrest: oiled exotic wood
bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001252
DIMENSIONS
height: 54 cm
width: 53 cm
length: 182 cm
weight: abt 45 kg
MATERIALS
seat: oiled exotic wood
bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
height: 54 cm
width: 53 cm
length: 182 cm
weight: abt 45 kg
MATERIALS
seat: oiled exotic wood
bases: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001253
DIMENSIONS
height: 45 cm
width: 45 cm
length: 180 cm
weight: abt 56 kg
MATERIALS
seat, backrest: varnished softwood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE: dark gray, black
height: 45 cm
width: 45 cm
length: 180 cm
weight: abt 56 kg
MATERIALS
seat, backrest: varnished softwood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE: dark gray, black
SKU: 001228
DIMENSIONS
height: 44 cm
width: 37 cm
length: 180 cm
weight: abt 40 kg
MATERIALS
seat, backrest: varnished softwood
bases: concrete
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE: teak, nut brown
height: 44 cm
width: 37 cm
length: 180 cm
weight: abt 40 kg
MATERIALS
seat, backrest: varnished softwood
bases: concrete
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE: teak, nut brown
SKU: 001327
Straight bench. Perfect for both indoor and outdoor use. Suitable for various social and cultural spaces to create the necessary resting places or seating.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
L2000 x H400mm.
Volume: 240L
Combinations & fixation:
LOOP Line can be combined with LOOP Arc details to form curved shapes and triangles.
With LOOP Corner you can form rectangles.
The modules are connected at both ends with clamps (B4- not included).
Note that the shape of the Loop Line does not allow it to stand alone unattached. It must be attached to the ground or to a LOOP Arc or LOOP Corner at either end.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: stainless steel, blown glass
The armrests also work as a mounting bracket. Therefore, when using armrests, the B4 mounting clips can be omitted.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
L2000 x H400mm.
Volume: 240L
Combinations & fixation:
LOOP Line can be combined with LOOP Arc details to form curved shapes and triangles.
With LOOP Corner you can form rectangles.
The modules are connected at both ends with clamps (B4- not included).
Note that the shape of the Loop Line does not allow it to stand alone unattached. It must be attached to the ground or to a LOOP Arc or LOOP Corner at either end.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: stainless steel, blown glass
The armrests also work as a mounting bracket. Therefore, when using armrests, the B4 mounting clips can be omitted.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 140.12
, Delivery time: 6-8 nädalat
BORG is a series of durable seating furniture.
By combining a one-sided bench with a table from the BORG series, you get a nice picnic furniture.
Dimensions: 2300*550*600mm
BORG benches have:
• Mounting holes for fixing to the ground
• Warranty 5 years
Material:
Frame material
• Corten steel 8 mm
• Galvanized steel 8 mm + 2 layers of powder paint
Seat material
• Garapa wood
• Pea sizes: 90x40 mm
Maintenance:
Regular cleaning and oiling of the wood, so that the pigment contained in the wood is preserved longer and the color change process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
By combining a one-sided bench with a table from the BORG series, you get a nice picnic furniture.
Dimensions: 2300*550*600mm
BORG benches have:
• Mounting holes for fixing to the ground
• Warranty 5 years
Material:
Frame material
• Corten steel 8 mm
• Galvanized steel 8 mm + 2 layers of powder paint
Seat material
• Garapa wood
• Pea sizes: 90x40 mm
Maintenance:
Regular cleaning and oiling of the wood, so that the pigment contained in the wood is preserved longer and the color change process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
SKU: BOBE.2300S.Ct
