Road sign clamp 90mm one-sided

The traffic sign base LMA-1 is suitable for a traffic sign post with a diameter of 60 mm, foundation height 420 mm, sole diameter 180 mm, weight 24 kg
The foundation is not intended to stand alone on the ground. The foundation must be dug into the ground!
NB! The foundation lock ring is not included. It must be purchased separately. Product code: 31051

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.

Stainless steel band
w: 19 mm (3/4") l: 30 m

The Loob screw banding tool is used to tension stainless steel bands with widths of up to 20 mm in all steel grades offered by Loob. It is made of corrosion-resistant galvanized steel.
The tool also has built-in blades for cutting through stainless steel.
It is used together with banding buckles.
The banding machine is suitable for use in a variety of environments.
Mechanism: manual
Band width range: 6,4mm-20mm
Band thickness range: 0,25mm-0,8mm
Dimensions: 220x300x60mm

The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.

Ground sleeve 76 x 400 mm cast iron, including tensioning nut and
PE-Clamping ring

- Dimensions: Ø630 x H260 mm
- Hole in the middle Ø 85 mm
- Weight: 130 kg

NB! The locking ring of the foundation (which holds the traffic sign post upright) is not included in the set. It must be purchased separately. Product code: 31051