Steel ground sleeve 60 x 500mm

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.

The installation sleeve is used for quick installation and removal of traffic signs in places where the post is often damaged, e.g. as a result of traffic accidents, turning of trucks, intentional damage or in places where signs are frequently changed.
The sleeve fits poles with a diameter of 60.3 mm.
The mounting sleeve is not intended to stand alone on the ground. The sleeve must be dug into the ground!

Ball-lock cable ties made of AISI 304 stainless steel, 201 provide excellent resistance to high temperatures, corrosion and extraordinary resistance to UV radiation. These cable ties are very easy to install.
EXAMPLE USE:
• fixing of cables and pipes in shipbuilding, petrochemical plants, offshore platforms and fire risk environments
• „electrical safety” markings in identification label installation (e.g. fire extinguishing system) which must be maintained in the event of fire
• installations where high mechanical and UV resistance is required

Tie width 7,9mm
Tie thickness 0,4mm
Tie lenght 600 mm

The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.

Steel ground sleeve 48 x 500mm hot-dip galvanized, with cast
clamping wedge + allen screw

Stainless steel band
w: 12 mm t: 0,6 mm l: 30 m

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 2,7m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.