Roadstuds 120x140x25 mm

Pavement reflector with glass balls to mark the edges of the pavement
Ø50mm H8mm
white
non-slip surface
the reflective feature lasts up to 20 years

Roadstuds: durable, unbreakable, solid body and reflectors
– size: 105x105x20 mm
– weight: 0,12 kg
– material: ABS
– colour : yellow, white
– fixing to concrete with screw kit
– operating temperature range: -20°C-/+60°C
– high visibility 1+1 reflectors

Road stud: durable, unbreakable, solid body and reflectors
– size: 100x220x32 mm
– weight: 0,24 kg
– material: PPC
– color: yellow
– fixing to concrete with screw kit
– operating temperature range: -20°C-/+60°C
– high visibility 3+3+3 reflectors

Wide range to use: on roads, streets, parking lots, pedestrian crossing, traffic islands, shoulder lines, tunnels, subways and all blind points required to mark.

Screw nail Ø6x105 mm for the roadstuds

- made of glass
- diameter 100 mm
- height from the ground after installation: 14mm
-> 150J
- load capacity 60T
- EN 1463-1 & 2

Can be installed in both asphalt and concrete
For example:
double paving stones,
RWS tires,
ordinary plates etc.

The snowplowable active LED road stud with a cast iron housing is a premium, high-performance road marking solution designed to maximize the visibility of traffic lanes and road edges. Unlike traditional passive reflectors, this model features built-in active LED lighting, providing superior visibility from much greater distances (up to several hundred meters ahead). Its heavy-duty cast iron protective housing ensures complete durability against heavy vehicle traffic and heavy-duty snowplows. It is exceptionally effective in total darkness, dense fog, and torrential rain, providing drivers with optimal guidance on the road, which substantially enhances traffic safety.

Ideally suited for locations where regular road paint wears out quickly and maximum visibility is critical – especially in dangerous curves, roundabouts, highway exits, near pedestrian crossings, and other high-risk areas requiring special attention from the driver.

– dimensions: cast iron housing outer diameter Ø180 mm, height 55 mm
– material: heavy-duty cast iron protective housing, impact-resistant polycarbonate LED element
– color: grey / black (cast iron housing)
– installation: the housing is fixed into a milled round hole in the road surface (Ø180 mm, depth 45 mm) using bitumen or polyurethane adhesive.
– compliance: complies with the EN 1463 standard
– LED / reflector color options: white, yellow, red, green, blue (unidirectional or bidirectional)