Rubber curb 100 black/white

The chain traffic separator is an element of road safety used for temporary or permanent separation of part
of road lane during roadworks. It can be used to change the organization of the movement. Also on the
parking lots to the fencing individual areas by traffic. Checks also to wrap the flowerbeds, islands. It is easy
and fast to install and allows you to organize very unusual surface shapes even from different angles.
It is made of rubber granulate.
Use it in yellow, black, red and white color.

Dimensions: 590x160x160mm

Consul MINI is an element of road safety made of rubber granules in a gray or brick-red color with a white rant covered with reflective microspheres. It makes very good visibility even at night. Consul MINI is characterized by:
-quick and easy installation
-resistance to mechanical damage

Application:
-in car parks at the entrance and exit
-as an island to separate traffic lines
-very good solution on the narrow roads where there is no possibility to install large islands

Consul 50 is an element of road safety made of rubber granules in a brick-red color. The edge of Consul can be covered with white reflective microspheres or with white 3M reflective tape. It makes very good visibility even at night. Consul 50 is an element characterized by:

- resistance to mechanical damage
- quick and easy installation

Application:
- in car parks
- for pedestrian crossings
- as an island to separate traffic lanes

The U-turn separator O3 is intended as a traffic safety element, for example at the junction of the main road and the ramp, giving the driver additional information about the intersection. Separating elements are marked with light-reflecting arrows, which ensures better visibility even in the dark.

- material: plastic
- fillable with water or sand
- RA2 class reflective arrows
- The O3 safety element can be attached to the asphalt or concrete surface with anchors

Dimensions:
O3.500 - R = 500
O3.750 – R = 750
O3.1000 – R = 1000

- dimensions H900xØ200mm
- RA2 class reflective strips

To be installed where driving lanes diverge, such as to mark separation islands and curves.
- dimensions H900xØ400mm
- RA2 class reflective strips
- made of polyethylene