Stainless Steel Cable Tie 7,9x600mm G304 100pcs
SKU: OBL(600)7,9G304-100
Unit: set
Qty: Out of Stock
Unit: set
Qty: Out of Stock
Price:
50,00 €
price inc. tax 62,00 €
Ball-lock cable ties made of AISI 304 stainless steel, 201 provide excellent resistance to high temperatures, corrosion and extraordinary resistance to UV radiation. These cable ties are very easy to install.
EXAMPLE USE:
• fixing of cables and pipes in shipbuilding, petrochemical plants, offshore platforms and fire risk environments
• „electrical safety” markings in identification label installation (e.g. fire extinguishing system) which must be maintained in the event of fire
• installations where high mechanical and UV resistance is required
Tie width 7,9mm
Tie thickness 0,4mm
Tie lenght 600 mm
Package 100 pcs
EXAMPLE USE:
• fixing of cables and pipes in shipbuilding, petrochemical plants, offshore platforms and fire risk environments
• „electrical safety” markings in identification label installation (e.g. fire extinguishing system) which must be maintained in the event of fire
• installations where high mechanical and UV resistance is required
Tie width 7,9mm
Tie thickness 0,4mm
Tie lenght 600 mm
Package 100 pcs
Similar products
Cylinder end cap for post Ø60mm
- Ø60/160 mm
- material: aluminum
- color: white
ATTENTION: The price is for one end cap. The figure shows a set of two clamps. The cylinder is also not included.
- Ø60/160 mm
- material: aluminum
- color: white
ATTENTION: The price is for one end cap. The figure shows a set of two clamps. The cylinder is also not included.
SKU: 4014198
, Qty: In Stock
19,50 €
The installation sleeve is used for quick installation and removal of traffic signs in places where the post is often damaged, e.g. as a result of traffic accidents, turning of trucks, intentional damage or in places where signs are frequently changed.
The sleeve fits poles with a diameter of 60.3 mm.
The mounting sleeve is not intended to stand alone on the ground. The sleeve must be dug into the ground!
The sleeve fits poles with a diameter of 60.3 mm.
The mounting sleeve is not intended to stand alone on the ground. The sleeve must be dug into the ground!
SKU: TMDZ(5616030000)
, Qty: In Stock
, Delivery time: 1-2 nädalat
62,00 €
One-sided traffic sign clip for a 220mm pipe
SKU: LMKL220
, Qty: In Stock
7,90 €
One-sided traffic sign clip for Ø85-100 pipe
SKU: LMKL90
, Qty: In Stock
5,90 €
The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.
Ground sleeve 76 x 400 mm cast iron, including tensioning nut and
PE-Clamping ring
Ground sleeve 76 x 400 mm cast iron, including tensioning nut and
PE-Clamping ring
SKU: 5617640000
, Qty: In Stock
35,00 €
Folding sign holder
For quick securing and marking of construction sites.
- footplate with anti-slip system, therefore no slipping on the construction site
- folds down undamaged during crash and thus increases safety enormously
- the shield holder consists of 40 x 40 square tube
- signs can be fixed with sign clamps or hooked into the lasered retaining contour
- usable height: 815 mm
- total height: 1100 mm
- weight 11.06 kg
The traffic sign is not included!
For quick securing and marking of construction sites.
- footplate with anti-slip system, therefore no slipping on the construction site
- folds down undamaged during crash and thus increases safety enormously
- the shield holder consists of 40 x 40 square tube
- signs can be fixed with sign clamps or hooked into the lasered retaining contour
- usable height: 815 mm
- total height: 1100 mm
- weight 11.06 kg
The traffic sign is not included!
SKU: 36080S
, Qty: In Stock
, Delivery time: 2 nädalat
103,00 €
