Steel ground sleeve 42 x 500mm
SKU: 5624150000
Unit: pc
Qty: Out of Stock
Unit: pc
Qty: Out of Stock
Price:
55,00 €
price inc. tax 68,20 €
The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.
Steel ground sleeve 42 x 500mm hot-dip galvanized, with cast
clamping wedge + allen screw
Steel ground sleeve 42 x 500mm hot-dip galvanized, with cast
clamping wedge + allen screw
Similar products
The traffic sign base LMA-1 is suitable for a traffic sign post with a diameter of 60 mm, foundation height 420 mm, sole diameter 180 mm, weight 24 kg
The foundation is not intended to stand alone on the ground. The foundation must be dug into the ground!
NB! The foundation lock ring is not included. It must be purchased separately. Product code: 31051
The foundation is not intended to stand alone on the ground. The foundation must be dug into the ground!
NB! The foundation lock ring is not included. It must be purchased separately. Product code: 31051
SKU: LMA1
, Qty: In Stock
15,50 €
When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.
SKU: 34216913105
, Qty: In Stock
280,00 €
One-sided traffic sign clip for 76mm pipe
SKU: LMKL76
, Qty: In Stock
5,20 €
One-sided traffic sign clip for a 220mm pipe
SKU: LMKL220
, Qty: In Stock
7,90 €
- Dimensions: Ø769 x H317 mm
- Hole in the middle Ø 85 mm
- Weight: 240 kg
NB! The locking ring of the foundation (which holds the traffic sign post upright) is not included in the set. It must be purchased separately. Product code: 31051
- Hole in the middle Ø 85 mm
- Weight: 240 kg
NB! The locking ring of the foundation (which holds the traffic sign post upright) is not included in the set. It must be purchased separately. Product code: 31051
SKU: VMT240
, Qty: Out of Stock
165,00 €
Stainless steel strap buckle
width: 12.7 (1/2") mm
thickness: 1.0 mm
type: Ear-Lock
AIS 304, 201
width: 12.7 (1/2") mm
thickness: 1.0 mm
type: Ear-Lock
AIS 304, 201
SKU: ZAP12,7(1,5)g304
, Qty: In Stock
0,35 €
