Stainless Steel Cable Tie Tool
SKU: NBL
Unit: pc
Qty: In Stock
Unit: pc
Qty: In Stock
Price:
60,80 €
price inc. tax 75,39 €
Tool for tensioning and cutting stainless steel cable ties. Resistant to corrosion and oxidation. Ideally suited for Ball-lock ties made from various grades of stainless steel. The handle can be used to adjust the level of tension on the tie as needed, the built-in mechanism cuts off the excess section of the tie.
The tool is very simple and quick to use.
Suitable for tie 4,6-7,9 mm, thickness 0,4 mm
The tool is very simple and quick to use.
Suitable for tie 4,6-7,9 mm, thickness 0,4 mm
Similar products
Foundation locking ring (for LMA-1, LMA-2 or road barrier). For mounting on a 60mm pole.
SKU: 31051
, Qty: In Stock
2,50 €
- Dimensions: 500x500x300mm
- Hole in the middle Ø max 80 mm and bottom Ø 60 mm
- Weight: 80 kg
NB! The locking ring of the foundation (which holds the traffic sign post upright) is not included in the set. It must be purchased separately. Product code: 31051
- Hole in the middle Ø max 80 mm and bottom Ø 60 mm
- Weight: 80 kg
NB! The locking ring of the foundation (which holds the traffic sign post upright) is not included in the set. It must be purchased separately. Product code: 31051
SKU: 34216913208
, Qty: In Stock
75,00 €
The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.
Steel ground sleeve 60 x 500mm hot-dip galvanized, with cast
clamping wedge + allen screw
Steel ground sleeve 60 x 500mm hot-dip galvanized, with cast
clamping wedge + allen screw
SKU: 5626050000
, Qty: Out of Stock
52,00 €
The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.
Ground sleeve 76 x 400 mm cast iron, including tensioning nut and
PE-Clamping ring
Ground sleeve 76 x 400 mm cast iron, including tensioning nut and
PE-Clamping ring
SKU: 5617640000
, Qty: In Stock
35,00 €
Stainless steel strap buckle
width: 12.7 (1/2") mm
thickness: 1.0 mm
type: Ear-Lock
AIS 304, 201
width: 12.7 (1/2") mm
thickness: 1.0 mm
type: Ear-Lock
AIS 304, 201
SKU: ZAP12,7(1,5)g304
, Qty: In Stock
0,35 €
Folding sign holder
For quick securing and marking of construction sites.
- footplate with anti-slip system, therefore no slipping on the construction site
- folds down undamaged during crash and thus increases safety enormously
- the shield holder consists of 40 x 40 square tube
- signs can be fixed with sign clamps or hooked into the lasered retaining contour
- usable height: 815 mm
- total height: 1100 mm
- weight 11.06 kg
The traffic sign is not included!
For quick securing and marking of construction sites.
- footplate with anti-slip system, therefore no slipping on the construction site
- folds down undamaged during crash and thus increases safety enormously
- the shield holder consists of 40 x 40 square tube
- signs can be fixed with sign clamps or hooked into the lasered retaining contour
- usable height: 815 mm
- total height: 1100 mm
- weight 11.06 kg
The traffic sign is not included!
SKU: 36080S
, Qty: In Stock
, Delivery time: 2 nädalat
103,00 €
