Type 2, Short T-piece - 25x25 mm

Slope Elbow 90° Variable angle 0° - 11°. Elbow joint fitting used as an end fitting for the top rail up to 11°.

Two Socket Cross - 25 mm. 90°- joint clamp between the middle rail and an upright on railings.

Side Outlet Tee - 25 mm. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. The upright tube passes through the clamp.

Steel galvanized square 25x25 mm tube profile / socket of 2 mm thickness.
This profile has a standard trade length of 6 meters, but can always be cut to size for you.
Suitable for our square tubefittings.

The advantage of black color is that the color goes very deep into the material, which prevents the pipe from corroding too quickly.
The black tubes are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Maximum length for shipping with couriers is 2 meters!

Angle of continuous upright with lip - 25 mm. Corner connection (90°), where the vertical tube runs through the clamp.

Female Single Socket. Often used together with other brackets, such as Type 36, 38, and 40. One part of swivel fitting, not generally used alone.