Type 35, Handrail Support, open Ø33,7 mm

Round tube D=33.7 mm
wall thickness 2.65 mm
painted black with powder
maximum profile length 2 m

Flagpole holder, which combines 2 different options for holding the flagpole - horizontal or at 45 degrees.

Perfect for attaching clothes rails and temporarily blocking the passageway (the tube can be easily inserted and removed between the clamps) 2 pcs in a set (left and right version). The clamps are made of hot-dip galvanized malleable iron, durable, corrosion-resistant and long-lasting. Comply with TÜV requirements.

Combi Socket Tee and Cross. Frequently used for racking. The upright hole can be changed according to the application. For shelved racking, the outside hole is upright, and for pallet racking the upright is inside the carrying rails.

ATTENTION: The price is for one tube fitting. The figure shows a set of two fittings. Adjustable Swivel Tee. Always used in pairs to allow angle variation between 54 and 270 degrees. 608049B = 70° - 208° (min/max angle) 608049C = 71° - 217° (min/max angle) 608049D = 97° - 270° (min/max angle) 608049E = 54° - 215° (min/max angle)

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.