Type 38, Male Double Lug Ø48,3

Add-on Four Socket Cross. Openable 4-way clamp to connect vertical posts to 4 horizontal tubes that are at right angles to each other. The vertical tube runs through the clamp.

Railing Base Flange. Strong baseplate to support vertical post. Vertical wide rib with two setscrews increases the strength of the clamp. The fixing holes in the base flange should be in line with the applied load.

Short Slope Tee Variable angle 0° - 11°. Top fitting for up to 11° uprights. This fitting can not be used to join horizontal tube within the fitting.

Combi Socket Tee and Cross. Frequently used for racking. The upright hole can be changed according to the application. For shelved racking, the outside hole is upright, and for pallet racking the upright is inside the carrying rails.

Groundsocket. A ground socket fitting inside the concrete for fixing upright tube. Post is retained with a locking setscrew, allowing easy insertion and removal (if necessary).

Side Palm. Side-mounting fitting for vertical post. The upright cannot pass through the fitting.