Type 5042, Corner connection 90° Ø 48,3 mm untreaded

Type 2230, 180° Swivel bearing for self closing gate Finish: untreaded aluminum

Single-shell pipe fitting with three outlets for connecting two pipes with a 90° angle. The continuous pipe and the end of the pipe are connected to this pipe fitting with a T. The pipes are fixed with three screws. Finish: untreaded aluminum

Double-shell/single-shell pipe connector with three outlets for connecting two pipes at variable angles. A continuous pipe and a pipe end are connected to a T using this pipe connector. The continuous tube is clamped by two half-shells. The pipe end is fixed in the pipe connector with a grub screw. The angle can be adjusted individually. Finish: untreaded aluminum

Double-shell pipe fitting with two outlets for connecting two pipes at a 90° angle. With this pipe fitting, two pipe ends are joined to form a 90° angle by attaching two halves. The screw and sleeve are connected to each other through holes. Therefore, the pipe fitting is suitable for higher tensile forces. Finish: untreaded aluminum

Double-shell pipe connector with two outlets for connecting a continuous pipe to a plate or glass pane. The pipe is connected to the plate/glass pane using this pipe connector by clamping two half-shells. Finish: untreaded aluminum

Single-shell pipe connector with two outlets for connecting two pipes in the same axis. The pipe ends can be butted in the pipe connector. The pipes are fixed by two grub screws. Finish: untreaded aluminum