Type 5037,Glass holder Ø 48,3 mm untreaded

Type 2230, 180° Swivel bearing for self closing gate Finish: untreaded aluminum

Single-shell pipe fitting with four outlets for connecting three pipes at four 90° angles. A continuous tube and two tube ends are connected to form a cross. With this pipe fitting, the pipes are fixed with four screws. Finish: untreaded aluminum

Double-shell/single-shell pipe connector with three outlets for connecting two pipes at variable angles. A continuous pipe and a pipe end are connected to a T using this pipe connector. The continuous tube is clamped by two half-shells. The pipe end is fixed in the pipe connector with a grub screw. The angle can be adjusted individually. Finish: untreaded aluminum

Double-shell pipe fitting with two outlets for connecting two pipes at a 90° angle. With this pipe fitting, two pipe ends are joined to form a 90° angle by attaching two halves. The screw and sleeve are connected to each other through holes. Therefore, the pipe fitting is suitable for higher tensile forces. Finish: untreaded aluminum

Single-shell pipe connector with two outlets for connecting two pipes with a variable angle. Two pipe ends are connected at a freely adjustable angle with this pipe connector. The pipes are fixed by two grub screws. Finish: untreaded aluminum

Single-shell pipe connector with an outlet for vertically attaching a pipe to a surface. The pipe connector has a round base plate with four holes for fastening. The pipe end is fixed in the pipe connector with two grub screws. Finish: untreaded aluminum