Type 5043a, Ground bearingr Ø 48,3 mm untreaded

Double-shell/single-shell pipe connector with three outlets for connecting two pipes at variable angles. A continuous pipe and a pipe end are connected to a T using this pipe connector. The continuous tube is clamped by two half-shells. The pipe end is fixed in the pipe connector with a grub screw. The angle can be adjusted individually. Finish: untreaded aluminum

Two-shell pipe fitting with four outlets. With this pipe fitting, a continuous pipe and two pipe ends are connected to form a cross, attaching two halves. Finish: untreaded aluminum

Single body four outlet pipe fitting, for connecting three pipes with four 90° elbows and one variable elbow. A continuous pipe and two pipe ends are connected to a cross at a freely adjustable angle using this pipe fitting. The pipes are fixed with four screws. Finish: untreaded aluminum

Double-shell pipe fitting with two outlets for connecting two pipes at a 90° angle. With this pipe fitting, two pipe ends are joined to form a 90° angle by attaching two halves. The screw and sleeve are connected to each other through holes. Therefore, the pipe fitting is suitable for higher tensile forces. Finish: untreaded aluminum

Single-shell pipe connector with an outlet for vertically attaching a pipe to a surface. The pipe connector has a round base plate with four holes for fastening. The pipe end is fixed in the pipe connector with two grub screws. Finish: untreaded aluminum

Double-shell pipe connector with two outlets for connecting a continuous pipe to a plate or glass pane. The pipe is connected to the plate/glass pane using this pipe connector by clamping two half-shells. Finish: untreaded aluminum