Type 62, Eye Hinge Ø48,3

Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.

Round pipe galvanized D=48.4mm wall thickness 2.9 mm
maximum profile length 6m
maximum length for shipping is 2 meters!

Combi Socket Tee and Cross. Frequently used for racking. The upright hole can be changed according to the application. For shelved racking, the outside hole is upright, and for pallet racking the upright is inside the carrying rails.

Female Single Socket. One part of swivel fitting, not generally used alone.

Single Swivel. Swivel fitting for variable angle fixing.

Long Slope Tee - Variable angle 0° - 11°. Similar to Type 2SE. This fitting can be used where a join is required in the horizontal tube.