Type 7, Adjustable Short Tee (45° - 60°) Ø42,4

Round pipe galvanized D=42.4mm wall thickness 2.6 mm
maximum profile length 6m
Maximum length for shipping by courier is 2 meters!

Square base plate. Use this tubefitting for positioning constructions. Due to the shape of the base plate, it can be fixed nicely on a surface at a 90° angle. Do not use it as a base for supporting safety railings or similar contructions.

Two Socket Slope Cross. Joint clamp between the middle rail and upright on slope railings up to 11°.

Four Socket Cross. 4-direction clamp used to fix uprights with 4 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.

Crossover 90°. Crossover clamp (90°). Used for long tube intersections with uprights where decreasing cutting cost and increasing strength of the system with continuity of the tube is desired.

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.