Wall Protection / Typ C+ 70 x 35 mm

Wall protection system to protect areas that are impacted frequently or subject to friction. Made of soft material.

- temperature resistance -10...60°C
- profile dimensions: 200x20mm x pikkus 4000mm

The two-level bumper system is used where there is an increased risk of impacts in places with higher thermal loads, for example:
in frozen product warehouses
in cold areas
in parking lots
on the ramps

We supply bumpers in a length of 4 m, and if necessary, you can adjust the length as needed.

Knuffi corner protection profile type C
- made from durable polyurethane
- designed for protecting walls and surfaces
- installation: using adhesive on the back of the protective guard
- suitable for both indoor and outdoor use (-40° to +100°C)
- fire-resistant, complies with DIN 4102 B2 classification
- dimensions: 40 x 30 mm
- lengths: 1 m, 5 m, 50 m
- easy to cut to size
- color: yellow-black or red-white

Knuffi pipe protection profile type R30
- made of durable polyurethane
- designed for pipe protection
- installation: with adhesive on the back of the protective barrier
- suitable for indoor and outdoor use (-40° to +100°C)
- flame retardant, complies with DIN 4102 B2 classification
- dimensions: 50 x 25 mm, diameter 30 mm
- lengths: 1 m, 5 m, 50 m
- easy to cut to size
- color: yellow-black or red-white

Knuffi edge protection profile type G
- Made of durable polyurethane
- Designed for protecting sharp or hazardous edges
- Installation: adhesive on the back of the warning protection
- Suitable for indoor and outdoor use (-40° to +100°C)
- Fire-resistant, complies with DIN 4102 B2 classification
- Dimensions: Ø26 x 30 mm, gap 8 x H19 mm
- Length: 1 m, 5 m, 50 m
- Easy to cut to size
- Color: yellow-black or red-white

The Pillar Wall Guard is a soft, flexible and shock-absorbing protector, characterized by its child-friendly and ribbed design.
The standard dimensions are 200 x 100 x 2.2 cm, but the Pillar Wall Guard can easily be cut to size for a wide range of applications.
Think of custom protection for pillars, walls, corners, and window sills. Its flexibility makes the Pillar Wall Guard the ideal solution to protect dangerous structures in kindergartens, schools, nurseries, and daycare centers. This product is a Pillar Guard, Wall Guard, and Corner Guard in one.

Dimensions ribbing version: 200 x 100 x 2 cm / 79 x 39 x 0.8 in
Robust and shock absorbing
For indoor and outdoor use (weatherproof)
Bite resistant
UV resistant
Easy to clean
Non-toxic material (fire-retardant version (toxic) on request)
To be installed with Bison Tix contact glue or similar (not included)
EN 71-1-2-3 and EN UNI 913:2009 certified

Adhesive Corner Protector
Made of durable polyurethane
Installation: using the adhesive tape
For indoor and outdoor use (-40° to +100°C)
Fire-resistant
Complies with DIN 4102 B2 classification
Dimensions: 45x26 mm
Color: black