Balustrade OP5 panel

OP10 is a b alustrade / single offset handrail & kerbail for level and ramp applications above one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP13 is a single inline handrailf for stairs and level applications under one metre.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP28 is a double offset handrail / on hob.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP30 is a twin offset handrail for the centre of a wide stair.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

The OP2 safety barrier consists of two rails. The set is modular and includes tubes and clamps. Smart clamps and a Ø 48 mm steel tube are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm tubes. The set is delivered in parts.

OP5 safety barrier module.
As a standard solution, the barriers are hot-dip galvanized.