Bikeway barrier OP26

OP6 is a balustrade / toeboard for level applications, greater than one metre
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP7 is a balustrade / single inline handrail for level and stair applications above one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP17 is a single inline handrail / mid & bottom rails for stairs and level applications under one metre (FFL) and typical fire stair applications.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP21 is top rail / mid rail bikeway barrier with offset top rail and midrail for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP27 is a single offset handrail / midrail & kerbrail for disabled ramps under one metre (FFL) with offset and midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

Horizontally opening swing gate, no separate support post needed
Locking mechanism: padlock, triangular key, or cylinder lock
Finishing: hot-dip galvanized or hot-dip galvanized with red and white reflective stickers
Installation: for casting in concrete or fixed to the ground with a base plate
Width options: 1500, 2000, 2500, 3000, 3500mm
Gate height: 950 mm