Handrail OP31

OP2 is a single inline handrail / midrail for stairs and level applications under one metre (FFL) & midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP21 is top rail / mid rail bikeway barrier with offset top rail and midrail for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP28 is a double offset handrail / on hob.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP30 is a twin offset handrail for the centre of a wide stair.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP32 is a single offset handrail / wall mounted for level, ramp and stair applications with suitable substrate for mounting.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

Aluminium ornamental protective railing bollard.

- coated anthrachite grey (metallic grey)
- approx. 900mm above ground
- cast aluminium with steel rod core
-bollard selection: - end post for top bar
- middle post for top bar
- corner post for top bar 90°
- end post for top and knee bar
- middle post for top and knee bar
- corner post for top and knee bar 90°