Balustrade OP8

End arch of the pipe fence for Ø48.3mm pipe railing
Price does not include pipe clamps
Size: 290x260 mm

OP19 is a single offset handrail / kerbrail for disabled ramps under one metre (FFL) with offset.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP25 is top rail / balustrade Infill bikeway barrier with offset top rail and balustrade infill for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP5 is a standard balustrade for level applications, greater than one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

The OP2 safety railing consists of two rails. The set is modular, including tubes and clamps.
The dimensions of the safety railing are L2000 x H1100 mm.
Tube fittings and steel tubes with a diameter of Ø48 mm are used for assembly; if desired, the safety railing can also be assembled with Ø42 or Ø60 mm tubes.
The set is delivered in parts.

OP5 safety barrier module.
As a standard solution, the barriers are hot-dip galvanized.