Handrail OP16

OP9 is a balustrade / single offset handrail for level and stair applications above one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP25 is top rail / balustrade Infill bikeway barrier with offset top rail and balustrade infill for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP31 is twin double offset handrail.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

Horizontally opening swing gate, no separate support post needed
Locking mechanism: padlock, triangular key, or cylinder lock
Finishing: hot-dip galvanized or hot-dip galvanized with red and white reflective stickers
Installation: for casting in concrete or fixed to the ground with a base plate
Width options: 1500, 2000, 2500, 3000, 3500mm
Gate height: 950 mm

The OP2 safety barrier consists of two rails. The set is modular and includes tubes and clamps. Smart clamps and a Ø 48 mm steel tube are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm tubes. The set is delivered in parts.

End arch of the pipe fence for Ø60.3mm pipe railing
Price does not include pipe clamps