Handrail OP30

OP8 is a balustrade / single Inline Handrail & Kerbrail for level and ramp applications above one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP12 is a balustrade / double offset handrail & kerbrail.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP27 is a single offset handrail / midrail & kerbrail for disabled ramps under one metre (FFL) with offset and midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

Horizontally opening swing gate, no separate support post needed
Locking mechanism: padlock, triangular key, or cylinder lock
Finishing: hot-dip galvanized or hot-dip galvanized with red and white reflective stickers
Installation: for casting in concrete or fixed to the ground with a base plate
Width options: 1500, 2000, 2500, 3000, 3500mm
Gate height: 950 mm

The OP2 safety railing consists of two rails. The set is modular, including tubes and clamps.
The dimensions of the safety railing are L2000 x H1100 mm.
Tube fittings and steel tubes with a diameter of Ø48 mm are used for assembly; if desired, the safety railing can also be assembled with Ø42 or Ø60 mm tubes.
The set is delivered in parts.

End arch of the pipe fence for Ø60.3mm pipe railing
Price does not include pipe clamps