Concrete roadblock hemisphere 130kg

Adhesive sign-masking-tape for short-term invalidation of traffic signs
In the presentation black / bright orange / black for use during the day
– size: 75mm x 33 m
– orange-black print
– non-reflective

Adapter is perfectly suited for a quick installation of traffic signs.

Tool for tensioning and cutting stainless steel cable ties. Resistant to corrosion and oxidation. Ideally suited for Ball-lock ties made from various grades of stainless steel. The handle can be used to adjust the level of tension on the tie as needed, the built-in mechanism cuts off the excess section of the tie.
The tool is very simple and quick to use.
Suitable for tie 4,6-7,9 mm, thickness 0,4 mm

The Loob screw banding tool is used to tension stainless steel bands with widths of up to 20 mm in all steel grades offered by Loob. It is made of corrosion-resistant galvanized steel.
The tool also has built-in blades for cutting through stainless steel.
It is used together with banding buckles.
The banding machine is suitable for use in a variety of environments.
Mechanism: manual
Band width range: 6,4mm-20mm
Band thickness range: 0,25mm-0,8mm
Dimensions: 220x300x60mm

The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.

Ground sleeve 76 x 400 mm cast iron, including tensioning nut and
PE-Clamping ring

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 2,7m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.