Grill lamp Light Pad 6xLED, amber

133x45x10mm
12-24V
super slim: 10mm
12xPowerLED, amber
new generation Xtreme optics: wide-angle visual and classic aesthetics, clear lens
16 flash patterns w. nonvolatile memory
multi-units synchronization in a simultaneous or alternating flash
weatherproof and vibration resistant
aluminum base for efficient heat dissipation, reverse polarity protection, black flange
IPX8, ECE R10, ECE R65 (XA1, XB1), ECE R65 (XA2, XB2) SAE J595 Class1, CA13 Class B (R/A/B)
surface mount, screw dimension 120mm

6 x 3W LED
voltage: 12/24V
Dualcolor: yellow and blue
Size: 130 x 2,4 x 1,9 mm
10 flash modes
It is possible to synchronize several pieces so that they flash in one selected mode
E20 R10, E9 R65
The set includes mounting screws

5 year warranty!

Out of production, last sample still available!

Parking separator – designed to separate parking spaces.

- material: SBR granulated rubber
- hardness of rubber: 70 A (+/- 5)
- dimensions: (L) 900 x (L) 150 x (H) 105 mm
- color: blue with 4 white reflective stripes
- fastening: with fastening anchors on asphalt or concrete surfaces
- 2 mounting holes Ø15 / 30 mm
- place of use: car parks, parking garages, garages

voltage is 12V/24V
6x LEDs 18 W
4 warning flashes
wire: 150 mm
dimensions: 119x31x10mm
according to standards such as ECE R10, ECE R65.

The OPTIBEAM FLEX LM6 warning light offers completely new possibilities in terms of installation location. The light, which can be installed on surfaces curved up to 120 degrees, can be installed, for example, on the support leg of a crane, on the corners of a vehicle, or on other surfaces where a light with a straight and rigid body could not be used before. The design is aerodynamic and takes into account today's demands in terms of functions and attachments, including interference protection CISPR CLASS 3 (no radio interference) and ECE R65 class 2 (allowed in traffic both day and night), as well as IP67 protection class against water and dust. In addition, the FLEX LM6 has dual memory with separate wiring to quickly switch between steady light and warning light modes.

- Dimensions: 126.8 x 30.2 x 10.7 mm
- Bends up to 120° to fit a curved mounting surface.
- made of Dow Silastic silicone
- aerodynamic: minimal wind resistance
- screw fastening with glue, screw covers
- white glass.
- 6 High-Power LEDs
- 20 flashing modes, double memory, synchronisable: up to 20 lights
- short circuit protection, weatherproof, vibration resistant.
- working temperature: -40° ... +65°C
- Certificates: ECE R65 Class 2, ECE 10, SAE J595 Cl.1, SAE J845 Cl.1, CISPR25 Cl.3, CA13
- Cable length: 300 mm
- Voltage: 12/24V

Dimensions: 86.00 x 86.00 x 19.00mm
Voltage: 12/24V
Low-profile warning light
Load capacity 5 tons
9 LEDs
18 different flashing modes
Screw distance 49mm
IP rating: IPX6
Certificates: ECE R10, R6, R91