Handrail OP28

OP18 single offset handrail / on hob for stairs & level applications under one metre (FFL) with offset (often used on concrete hobs).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP30 is a twin offset handrail for the centre of a wide stair.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP32 is a single offset handrail / wall mounted for level, ramp and stair applications with suitable substrate for mounting.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP33 is a double offset handrail / wall mounted.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP5 is a standard balustrade for level applications, greater than one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

Horizontally opening swing gate, no separate support post needed
Locking mechanism: padlock, triangular key, or cylinder lock
Finishing: hot-dip galvanized or hot-dip galvanized with red and white reflective stickers
Installation: for casting in concrete or fixed to the ground with a base plate
Width options: 1500, 2000, 2500, 3000, 3500mm
Gate height: 950 mm