Handrail OP33
SKU: OP33.
Unit: m
Delivery time: 1 nädal
Unit: m
Delivery time: 1 nädal
OP33 is a double offset handrail / wall mounted.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Similar products
OP2 is a single inline handrail / midrail for stairs and level applications under one metre (FFL) & midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP2.
, Delivery time: 1 nädal
OP3 is a single inline handrail / midrail & kerbrail for disabled ramps under one metre (FFL) and midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP3.
, Delivery time: 1 nädal
OP22 is top rail / handrail bikeway barrier with offset top rail and handrail for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP22.
, Delivery time: 1 nädal
OP26 is top rail / handrail & balustrade infill bikeway barrier with offset top rail, handrail and balustrade infill for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP26.
, Delivery time: 1 nädal
OP5 safety barrier module.
As a standard solution, the barriers are hot-dip galvanized.
As a standard solution, the barriers are hot-dip galvanized.
SKU: OP5.MODL.K
, Qty: Out of Stock
148,40 €
Manual barrier with pneumatic spring and fixed pole support
Main support: Steel construction 120 x 80 mm square tube with base plate 360 x 360 x 8 mm
for plugging down, including 4 holes Ø 20 mm
for anchor, hot-dip galvanized and powdercoated red,
barrier arm can be fixed in open and closed position
Supporting post: Steel tube 70 x 70 mm
with base plate 220 x 220 x 8 mm, including 4 holes Ø 20 mm for anchor
Barrier arm: Thick-walled Ø 80 mm aluminium tube
powder-coated with red reflecting stripes
Locking mechanism at the post support
Total width: Clear width + approx. 180 mm
Height: approx. 950 mm above ground
Width options: 3000, 4000, 5000, 6000, 7000 mm
Locking mechanism:
padlock
triangular lock
Euro profile cylinder lock
Main support: Steel construction 120 x 80 mm square tube with base plate 360 x 360 x 8 mm
for plugging down, including 4 holes Ø 20 mm
for anchor, hot-dip galvanized and powdercoated red,
barrier arm can be fixed in open and closed position
Supporting post: Steel tube 70 x 70 mm
with base plate 220 x 220 x 8 mm, including 4 holes Ø 20 mm for anchor
Barrier arm: Thick-walled Ø 80 mm aluminium tube
powder-coated with red reflecting stripes
Locking mechanism at the post support
Total width: Clear width + approx. 180 mm
Height: approx. 950 mm above ground
Width options: 3000, 4000, 5000, 6000, 7000 mm
Locking mechanism:
padlock
triangular lock
Euro profile cylinder lock
SKU: 415
