Balustrade OP7

OP12 is a balustrade / double offset handrail & kerbrail.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP17 is a single inline handrail / mid & bottom rails for stairs and level applications under one metre (FFL) and typical fire stair applications.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP22 is top rail / handrail bikeway barrier with offset top rail and handrail for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP27 is a single offset handrail / midrail & kerbrail for disabled ramps under one metre (FFL) with offset and midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP33 is a double offset handrail / wall mounted.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

The OP2 safety railing consists of two rails. The set is modular, including tubes and clamps.
The dimensions of the safety railing are L2000 x H1100 mm.
Tube fittings and steel tubes with a diameter of Ø48 mm are used for assembly; if desired, the safety railing can also be assembled with Ø42 or Ø60 mm tubes.
The set is delivered in parts.