LED strobo light 6xLED slim 12/24V

Super thin 9mm
horizontal mount
amber leds (6)
transparent lens
23 different flashing alternatives with non-volatile memory function
max 15 flashers can be synchronized for simultaneous or alternating flash
solid aluminum housing: efficient heat dissipation and maximum durability
easy to install
self-contained: no external flasher
reverse polarity protection
max current: 1A@12VDC / 0,5A@24VDC
screw distance 102mm, weatherproof and vibration resistant design for external and internal use
ECE R65 (XA2); ECE R10; SAE J595 Class 1; CISPR 25 Class 2
IPX7, 0.5mm²
cables: 250mm

114.6x43.4x9mm
11-30V
12xEffectLEDs, amber beacon
clear glass
25 different flashing alternatives, several flashers can be synchronized together
IP67
12V/1.56A / 24V/0.78A
screw distance 104mm
SAE / Title XIII / ECE R65 Class2 (XA2) / ECE R10 / e13

Ø46x17mm
amber
12 flashing programs
surface, flush and base mounting
synchronizable
12-24V

LW0043 has features such as:
1 warning flash, two level of intensity, day and night
4xLEDs 10 W
according to standards such as ECE R10, ECE R65.
voltage is 12 V/24 V

. LED Power: 24pcs*2W OSRAM, amber
. Voltage: 12-24Volt DC
. Waterproof: IP67
. Certificate: ECE R65 Single Flash, ECE R10
. SAE J595 CLASS1 Double Flash
. Material: PC lens, aluminum base with 3M sticker
. Flashing: 19 patterns, single, double, alternate flash...
. Function: With memory, Flashing at the same time, Flashing alone
. Five wires: Red-Positive, Black-Negative, Yellow-Switch, White-Input, Gray-Output

The OPTIBEAM FLEX LM6 warning light offers completely new possibilities in terms of installation location. The light, which can be installed on surfaces curved up to 120 degrees, can be installed, for example, on the support leg of a crane, on the corners of a vehicle, or on other surfaces where a light with a straight and rigid body could not be used before. The design is aerodynamic and takes into account today's demands in terms of functions and attachments, including interference protection CISPR CLASS 3 (no radio interference) and ECE R65 class 2 (allowed in traffic both day and night), as well as IP67 protection class against water and dust. In addition, the FLEX LM6 has dual memory with separate wiring to quickly switch between steady light and warning light modes.

- Dimensions: 126.8 x 30.2 x 10.7 mm
- Bends up to 120° to fit a curved mounting surface.
- made of Dow Silastic silicone
- aerodynamic: minimal wind resistance
- screw fastening with glue, screw covers
- white glass.
- 6 High-Power LEDs
- 20 flashing modes, double memory, synchronisable: up to 20 lights
- short circuit protection, weatherproof, vibration resistant.
- working temperature: -40° ... +65°C
- Certificates: ECE R65 Class 2, ECE 10, SAE J595 Cl.1, SAE J845 Cl.1, CISPR25 Cl.3, CA13
- Cable length: 300 mm
- Voltage: 12/24V