Round steel tube galvanized Ø48,3 mm

Plastic cap for tube 40x40 mm
black
Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.

Steel wire is woven into the elastics of the banner attachment. The space between the fabric and the frame varies from 4 to 5 cm.
The rubbers are UV-resistant and long-lasting.

Specifications:
- Length: 160mm
- Rubber thickness: 6mm
- Rubber capacity 100kg

The distance of the print from the inner frame depends on the diameter of the frame tubes:
Tube 42 mm - Distance 5 cm
Tube 48 mm - Distance 4 cm

Plastic cap for tube 25X25 mm
black
Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.

Saddle Clamp. Our steel cap brackets are electrolytically galvanized and therefore rust-resistant. These so-called single-lip cover brackets are available for tube sizes 21.3 mm up to 60.3 mm. Extremely suitable for mounting blades on a tubular frame base.

Square base plate. Use this tubefitting for positioning constructions. Due to the shape of the base plate, it can be fixed nicely on a surface at a 90° angle. Do not use it as a base for supporting safety railings or similar contructions.

Combi Socket Tee and Cross. Frequently used for racking. The upright hole can be changed according to the application. For shelved racking, the outside hole is upright, and for pallet racking the upright is inside the carrying rails.