Bikeway barrier OP25

FlexiRail flexible barriers are suitable for installation in places where pedestrians and cyclists tend to cross the road in the wrong place or where there is a high risk of accidentally stepping on the road. With the help of FlexiRail barriers, it is easier for road users to orient in traffic and thus prevent dangerous situations.
Module dimensions: 1800x240xH880mm

OP2 is a single inline handrail / midrail for stairs and level applications under one metre (FFL) & midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP19 is a single offset handrail / kerbrail for disabled ramps under one metre (FFL) with offset.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP23 is top rail / midrail & bottom rail bikeway barrier with offset top rail, midrail and bottom rail for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP5 is a standard balustrade for level applications, greater than one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

The OP2 safety railing consists of two rails. The set is modular, including tubes and clamps.
The dimensions of the safety railing are L2000 x H1100 mm.
Tube fittings and steel tubes with a diameter of Ø48 mm are used for assembly; if desired, the safety railing can also be assembled with Ø42 or Ø60 mm tubes.
The set is delivered in parts.