LED Signal lamp 4x1W LED, yellow

Dimensions: 129x16x27mm
Type: ES6
Power: max 13.7 W
12-24V
6xLED yellow
23 different flashing modes with memory function, synchronizable
ECE R65 (XA1), ECE R10-05 (EMC), SAE Class 1, CA Title 13

114.6x43.4x9mm
11-30V
12xEffectLEDs, amber beacon
clear glass
25 different flashing alternatives, several flashers can be synchronized together
IP67
12V/1.56A / 24V/0.78A
screw distance 104mm
SAE / Title XIII / ECE R65 Class2 (XA2) / ECE R10 / e13

132x49x19mm
11-30V
12x LED, amber
Clear lens
25 different flashing alternatives, several flashers can be synchronized together
IP67
SAE / Title XIII / ECE R65 Class2 (XA2) / e13

Voltage: 10-30V
9xLED 360 ° amber
set includes two turn signals.
Can be concealed in front / rear / edge light or as a surface light.
Good visibility around 360 degrees.
12V 1.2A / 24V 0.7A

Mõõtmed: 86x28x9mm
Pinge: 12-24V
3x LED, red
clear lens
12 flashing options, non-volatile memory for a last used pattern
aluminum base: good heat dissipation, waterproof, vibration-resistant
several flashers can be synchronized together
IPX8
ECE R65, SAE J595 Class1, CA13 class B

The OPTIBEAM FLEX LM6 warning light offers completely new possibilities in terms of installation location. The light, which can be installed on surfaces curved up to 120 degrees, can be installed, for example, on the support leg of a crane, on the corners of a vehicle, or on other surfaces where a light with a straight and rigid body could not be used before. The design is aerodynamic and takes into account today's demands in terms of functions and attachments, including interference protection CISPR CLASS 3 (no radio interference) and ECE R65 class 2 (allowed in traffic both day and night), as well as IP67 protection class against water and dust. In addition, the FLEX LM6 has dual memory with separate wiring to quickly switch between steady light and warning light modes.

- Dimensions: 126.8 x 30.2 x 10.7 mm
- Bends up to 120° to fit a curved mounting surface.
- made of Dow Silastic silicone
- aerodynamic: minimal wind resistance
- screw fastening with glue, screw covers
- white glass.
- 6 High-Power LEDs
- 20 flashing modes, double memory, synchronisable: up to 20 lights
- short circuit protection, weatherproof, vibration resistant.
- working temperature: -40° ... +65°C
- Certificates: ECE R65 Class 2, ECE 10, SAE J595 Cl.1, SAE J845 Cl.1, CISPR25 Cl.3, CA13
- Cable length: 300 mm
- Voltage: 12/24V