Topline laser with Key Fob, ISO 2A class, Green line laser

The IPAS pedestrian warning chip is designed to be used in conjunction with other IPAS warning system products to reduce the risk of collisions between pedestrians and vehicles.

If a pedestrian gets too close to a forklift/vehicle on which an IPAS vehicle antenna is installed, the warning chip gives a signal either by vibration and/or sound.

Dimensions: 40 × 72 × 19.5mm

The IPAS warning system is designed to reduce the risk of collisions between pedestrians and vehicles. While most similar systems work with RFID technology, the IPAS system works with ultra-wideband technology (UltraWideBand technology), which is considerably more accurate and has a larger working radius (up to 30m). A larger working radius gives drivers time to react even when moving at higher speeds.

Advantages of the IPAS system: The devices are easy to install and do not require rebuilding of vehicles. The antenna attaches using strong magnets and can be powered either by connecting directly to the vehicle's electrical system or to a cigarette lighter.
The devices work on 12/24V.

Suitable for installation in "blind corners/areas" where there is a risk of collision between vehicles and pedestrians. Warns with flashing lights and a warning sound.
Dimensions: 123x140x112mm

Wireless forklift camera, installation to the forklift fork with a magnet, rechargeable batteries, 7" screen, automatic connection, wireless signal transmission distance up to 100m, 4 input channels, possibility to connect an additional screen, single image mode and automatic periodic change, automatic channel detection; each channel can be individually set to detect the image, built-in recorder (up to 128GB Micro SD memory card), real-time recording and playback

Description: CAMERA: 756x504px, wireless, frequency 2400-2483.5MHz, IP69K - 10G - durable metal housing, 1-3m night vision, MPEG4 video format, frame rate PAL: 25fps, NTSC 30fps, delay 120ms, operating temperature -20℃ ... + 70℃, current 10-32VDC, BATTERY SET: rechargeable, 8700mAh - 31.32Wh, charging voltage 5-16V with USB cable, USB cable with wires and 240VAC power cord included, charging time 12h (5V) - 4h (12V), discharge (@160-180mA ): 12-14h, IP69K, magnetic mount, SCREEN: 7", 800x3x480px, wireless, remote control, 4 channels, 10-32VDC, max power consumption 6W, speaker 1.5W/8Ω, U-mount frame and foot included

Voltage: 10-32V

Collision Sentry Corner Pro is the collision warning system designed to reduce or eliminate accidents at blind corner intersections. When motion is detected on both sides of the corner, creating conditions for an accident, Collision Sentry Corner Pro sends a visual and audio alert to warn of approaching traffic.

Collision Sentry Corner Pro is easy to install, self-powered, compact, highly visible and reliable.

Loud enough to be heard within the corner zone; pitch sets it apart from other background noise
Volume can be adjusted (high/low) or turned off.
Sounds and flashes ONLY when motion is detected on both sides of the corner

Integrated, recessed magnet mounts snap on to rack for a secure, tight fit
Integrated mounting points for attaching the unit to non-magnetic surfaces
Optimal installation height is 7-9 feet

Self-powered: Standard D-cell batteries (included)
Blue light, beeping low battery indicator
Battery life tested to a minimum of 12 months

Passive infrared motion sensors
Detection zone 6-7 meters in each direction
Alert sent in ample time to take corrective action
Pre-set and ready to use

Multi Zone provides crash protection wherever you need it.
This is a new generation collision warning system that expands the possibilities to prevent collisions in several areas. Multi-Zone creates a safer work environment by reducing or eliminating blind spot collisions.
The product extends the collision protection beyond the 90 degree angle. The fact is that not all blind spots are located at corner intersections. Multi-Zone gives you the flexibility to define the conflict zones that need protection in your facility.

Main Features:

-Multi-zone detection: Multi Zone is a sophisticated multi-zone detection system that provides comprehensive coverage to protect your workspace. With its advanced sensors, it creates a protective barrier around sensitive areas, detecting potential collisions and alerting operators in real time.

-360-degree awareness: It monitors all angles and detects potential hazards from all directions, minimizing blind spots and greatly reducing the risk of accidents.

-Customizable warning signals: Customize the warning system with customizable warning signals according to your needs. Multi Zone offers a variety of notification options, including visual indicators, audible alarms and even remote notifications, ensuring your team is quickly notified of potential threats.

-User-friendly interface: Simplify safety management with an intuitive user interface. Multi Zone is designed for ease of use, allowing operators to quickly understand and respond to alerts. Smooth controls make it accessible to all employees, helping to create a safer work environment.

-Durable construction: Multi-Zone is built to withstand the conditions of an industrial environment. Its robust construction ensures longevity, providing a reliable safety solution that meets your operational requirements.

-Easy installation: Multi Zone is designed for hassle-free installation, minimizing downtime and disruption to your workflow. Its modular design allows layout flexibility, adapting to the specific needs and layout of your facility.

-Scalability: Whether you have a small workshop or a large production facility, Multi-Zone can be easily scaled to meet your evolving safety requirements. Add or customize zones as needed, ensuring continued protection as your operations grow.

Invest in Multi-Zone and prioritize the well-being of your team while protecting valuable equipment. With advanced technology, customizable features and a user-friendly interface, this collision avoidance system is the key to a safer and more efficient workplace.