Type 26, Four Socket Cross Ø60,3 mm

Round pipe galvanized D=60.3 mm wall thickness 2.0 mm
maximum length 7 m
maximum length 2m for shipping with the courier!

Corner With Trough Tube 90°. Often used on intermediate rail corners to match Type 18, tube passes through the clamp.

Side Outlet Tee. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.

Reducing Crossover 90°. Used as Type 28. reduction fitting makes it possible to design structures in two different tube diameters - horizontal Ø60.3 and vertical Ø48.3mm.

Clamp-On Tee. Used for adding to and modifying an existing structure.

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.