Type 280, Add-on Crossover 90° Ø48,3

Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.

Side Outlet Tee. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.

Type 35 handrail clamp, open. For attaching the handrail pipe to the wall. The clamps are made of hot-dip galvanized malleable iron, durable, corrosion-resistant and long-lasting. Comply with TÜV requirements.

Double Swivel. Swivel fitting for variable angle fixing for two sides of the post.

Male Corner Lug 90°. Similar to Type 36 with two lugs which are perpendicular to each other.

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.