Type 751, DDA Assist Saddle Fitting

Add-on Side Outlet Tee. The same tube fitting as type 24, but this tube fitting can be placed on an existing construction by means of a foldable part on the vertical tube connector.

Clamp-On Crossover. Open cross connection where the railing is placed in the connection and can then be secured.

Type 2230, 180° Swivel bearing for self closing gate Finish: untreaded aluminum

A banner frame made of smart clips, which is made according to the dimensions of the banner.

We offer frames with two sizes of tubes:
- D=42.4mm wall thickness 2.65 mm powder coated, black
- D=48.3mm wall thickness 2.9 mm powder coated, black

Sample products are complete in 4 different variations:
With a 42.4mm diameter pipe and clamps, sizes 1000x1000m and 2000x2000mm (the price does not include the banner, hooks, elastics or fixing clamps.)
With 48.3mm diameter pipe and clamps, size 1000x1000m and 2000x2000mm (the price does not include banner, hooks, elastics or fixing clamps.)

The products with the given dimensions are presented for informational purposes. We can complete the frames according to your desired dimensions. To do this, fill out the inquiry basket form or write to us at info@tubex.ee
When asking for a price quote, please consider that the outer dimension of the banner frame = canvas size + 26 cm (only when using rubber bands or standard hooks)

Cairns information board is 100% waterproof and therefore very suitable for outdoor use.

Dimensions: 259*346*25mm

- The profile is 25 mm wide and silver anodized.
- Other RAL colors can be supplied upon request.
- The corners are beveled.
- The frames include 4 screws and plugs for wall mounting.
- A transparent PVC cover sheet is included.
- There are seals inside the frame that prevent moisture from reaching the printed material mounted inside the frame.

Angle of continuous upright - 25 mm. Corner connection (90°), where the vertical tube runs through the clamp.