Type 73, Metal cap Ø48,3

Plastic cap for tube 40x40 mm
black
Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.

Round tube D=48.3mm
wall thickness 2.9 mm
powder coated yellow
maximum profile length 3 m

Crossover 90°. Crossover clamp (90°). Used for long tube intersections with uprights where decreasing cutting cost and increasing strength of the system with continuity of the tube is desired.

Coat hook. Hook 90° narrow. Similar to tube coupling type 61, but better suited for making coat hangers and the like.

Designed to attach a freestanding handrail to an upright post on a variable angle.

The 752 Interclamp fitting is designed for intermediate support of horizontal galvanised handrail tubes where no joining of the tubes are required. They are also used when fitting the 724 Assist handrail end termination to the upright post.

Aluminum cap used to plug the end of the tube.

Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.