Categories

EasyClamp

Sort By:
Display: as list / as grid

By default, prices are displayed without VAT. To see VAT prices, change your selection here 

 
Add-On Corner With Trough Tube 90°. Openable corner connection (90°), with the vertical tube running through the clamp.
SKU: NKL020OE ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
19,90 €
Add-on Side Outlet Tee. The same tube fitting as type 24, but this tube fitting can be placed on an existing construction by means of a foldable part on the vertical tube connector.
SKU: NKL024OE ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
22,60 €
Swivel Base Plate (Unisize). For fixing structures to wall or floor, usually used with Type 42.
SKU: NKL050 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
4,80 €
Add-on Four Socket Cross. Openable 4-way clamp to connect vertical posts to 4 horizontal tubes that are at right angles to each other. The vertical tube runs through the clamp.
SKU: NKL026OE ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
27,80 €
The cross tube fitting consists of three parts, which allows to connect different size tubes Ø 90 mm and Ø 48 mm
SKU: NKL089E-set ,   Qty: Out of Stock ,   Delivery time: 1-2 nädalat
16,30 €
Add-On Two Socket Cross. Openable 90° connection clamp between the central rail and the railing pillars.
SKU: NKL022OE ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
19,90 €
Reducing Crossover 90°. Used as Type 28. reduction fitting makes it possible to design structures in two different tube diameters.
SKU: NKL028V ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 7,20 €
Short Tee. Provides a perpendicular connection between two tubes. Top fitting for straight and level railing uprights. This fitting cannot be used to join a horizontal tube within the fitting.
SKU: NKL002 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 2,60 €
Reducing Short Tee. Used as Type 2. Rediction fitting makes it possible to design structures in two different tube diameters.
SKU: NKL002V ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 6,80 €
Short Slope Tee Variable angle 0° - 11°. Top fitting for up to 11° uprights. This fitting can not be used to join horizontal tube within the fitting.
SKU: NKL002S ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 9,70 €
Long Tee. Similar to Type 2. This fitting can be used where a join is required in the horizontal tube.
SKU: NKL004 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 6,40 €
Long Slope Tee - Variable angle 0° - 11°. Similar to Type 2SE. This fitting can be used where a join is required in the horizontal tube.
SKU: NKL004S ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 9,20 €
Swivel Tee. Male spigot may be secured within another fitting for variable angles in hand railings for staircases, ramps and similar structures.
SKU: NKL005 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 4,90 €
Elbow 90°. Elbow joint fitting used as an end fitting for the top rail.
SKU: NKL006 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 3,10 €
Slope Elbow 90° Variable angle 0° - 11°. Elbow joint fitting used as an end fitting for the top rail up to 11°.
SKU: NKL006S ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 6,60 €
Adjustable Short Variable angle 45° - 60°. This adjustable angle clamp is used to join tubes between 45° and 60°. Use for diagonal braces, struts and an angled top rail joint to vertical posts on stairs.
SKU: NKL007 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 6,60 €
Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.
SKU: NKL008 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 4,90 €
Internal Coupling. A streamlined flush joint in two tubes of the same size. Wall thickness must be 3.2 mm. Do not apply direct loads to this joint.
SKU: NKL009 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 2,70 €
Wall Flange. This clamp is used on structures where positional fixing is required. Do not use as a base flange to support guard railings or similar systems.
SKU: NKL010 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 3,60 €
Railing Base Flange. Strong baseplate to support vertical post. Vertical wide rib with two setscrews increases the strength of the clamp. The fixing holes in the base flange should be in line with the applied load.
SKU: NKL012 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 8,90 €
Slope Railing Base - variable angle 0° - 11°. Base fitting for railings designed on slopes up to 11°.
SKU: NKL012S ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 14,70 €
Horizontal Base Railing Support. Side-mounting clamp for vertical posts. tube cannot pass through this clamp. Designed for palm fixing guard railings and balustrades to walls, parapets, steps and ramps.
SKU: NKL013 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 15,40 €
Vertical Base Railing Support. Similar to Type 13, these applies even more to Type 13.
SKU: NKL014 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 14,90 €
Three Way Top Corner. Corner joint (90°) clamp used for top rail corners and any other rectangular system.
SKU: NKL018 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 4,20 €
Corner With Trough Tube 90°. Often used on intermediate rail corners to match Type 18, tube passes through the clamp.
SKU: NKL020 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 3,40 €
Two Socket Cross. 90° joint clamp between the middle rail and an upright on railings.
SKU: NKL022 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 3,70 €
Two Socket Slope Cross. Joint clamp between the middle rail and upright on slope railings up to 11°.
SKU: NKL022S ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 7,70 €
Adjustable Two Socket Cross. This variable angled clamp may be used at any selected angle between 30 and 45 degrees. Type 7 can be used for the top rail.
SKU: NKL023 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 9,60 €
Side Outlet Tee. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.
SKU: NKL024 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 4,90 €
Four Socket Cross. 4-direction clamp used to fix uprights with 4 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.
SKU: NKL026 ,   Qty: In Stock ,   Delivery time: 1-2 nädalat
From 6,20 €